TCP IP Exam - Sharpen Your IP Skills With a Free Quiz

Back to exams page.

Here is a typical TCP/IP quiz you would have to pass for helpdesk or networking junior roles. If you apply through a recruitment agent a link would appear on your screen via email with a timer and you would have around 30 minutes to pass and be expected to score at least 85% (34/40).

If you don't do too well then please check out our CompTIA Network+ course which will get you up to scratch in no time. If you want to try out 101 CompTIA Network+ labs then please check out our book on Amazon.

1. Put the OSI layers into the correct order.

Presentation
Session
Application
Transport
Network
Data Link
Physical

Question 1 of 40

2. Application layer protocols include? (choose all that apply)

POP3

SMTP

FTP

Telnet

ARP

Question 2 of 40

3. Match the PDU to the correct layer.

Layer 1	Frame Unselect Packet (Datagram) Unselect Bit Unselect Segment Unselect
Layer 2	Frame Unselect Packet (Datagram) Unselect Bit Unselect Segment Unselect
Layer 3	Frame Unselect Packet (Datagram) Unselect Bit Unselect Segment Unselect
Layer 4	Frame Unselect Packet (Datagram) Unselect Bit Unselect Segment Unselect

Question 3 of 40

4. Trivial File Transfer Protocol (TFTP) is an example of a protocol that uses UDP.

True

False

Question 4 of 40

5. MAC addresses are 48-bit values. The first 24 bits represent the _________ code, which identifies the vendor of the device.

Organizational Unique Code (OUC)

Operational Unique Identifier (OUI)

Organizational Unique Identifier (OUI)

MAC Unique Identifier (MUI)

Question 5 of 40

6. Routers use the Address Resolution Protocol (ARP) to determine the IP address of the device with a specific MAC address and encapsulates the
packet with a header that contains that specific IP address before sending it on the wire.

True

False

Question 6 of 40

7. The IP address in binary below is what in decimal?

11000000.10101000.10000000.10101001

190.163.125.162

200.100.22.111

192.168.128.169

191.168.111.169

Question 7 of 40

8. Using the IEEE’s 64-bit ______ format, a network device can automatically assign itself an IPv6 address. This is done by referencing the unique 48-bit MAC address and reformatting the value so that it matches the ____ specification.

EUI-64

OUI

OUI-64

NAT-PT

Question 8 of 40

9. IPv4 Class D is reserved for defining Multicast group addresses?

224.0.0.0 to 249.255.255.255

222.0.0.0 to 239.255.255.255

230.0.0.0 to 239.255.255.255

224.0.0.0 to 239.255.255.255

Question 9 of 40

10. Your boss asks you to work out the summary address to advertise for the below networks. What answer do you give him?

192.100.168.0
192.100.169.0
192.100.170.0
192.100.171.0
192.100.172.0
192.100.173.0
192.100.174.0
192.100.175.0

192.100.168.0/22

192.100.168.0/21

192.100.168.0/23

192.100.168.0/24

Question 10 of 40

11. IPv6 uses which range of addresses for multicast?

EF00::/8

FE00::/8

FF00::/8

EE00::/8

Question 11 of 40

12. IPv6 uses the ______ protocol (RFC 2461), unlike IPv4, which uses ARP.

ICMPv6

DHCPv6

ARPv6

Neighbor Discovery (ND)

Question 12 of 40

13. Broadcast frames sent by a device in one VLAN will reach the devices in that specific VLAN only.

True

False

Question 13 of 40

14. The Spanning Tree Protocol (STP), defined by _____, is a loop-prevention protocol that allows switches to communicate with each other in order to discover physical loops in a network.

IEEE 802.1F

IEEE 802.1A

IEEE 802.1D

IEEE 802.1B

Question 14 of 40

15. STP calculations are based on which two key concepts?

Path cost

Port cost

Bridge ID

Interface type

Reliability

Question 15 of 40

16. The default STP Bridge Priority value is ____.

32768

4096

Question 16 of 40

17. Distance Vector routing protocols include? (choose all which apply)

RIP version 1

RIP version 2

IGRP

RIPng

OSPF

IS-IS

Question 17 of 40

18. RIPv2 uses____ as a metric for path selection, with a maximum hop count of __.

reliability/254

bandwidth/16

hop count/255

hop count/15

Question 18 of 40

19. Unlike Distance Vector routing protocols, Link-State protocols flood information about its links to a specific area or to all the routers in the network.

True

False

Question 19 of 40

20. Match the Administrative Distance Values with the correct protocols.

RIP	20 Unselect 200 Unselect 110 Unselect 120 Unselect 90 Unselect
EIGRP	20 Unselect 200 Unselect 110 Unselect 120 Unselect 90 Unselect
OSPF	20 Unselect 200 Unselect 110 Unselect 120 Unselect 90 Unselect
Internal BGP	20 Unselect 200 Unselect 110 Unselect 120 Unselect 90 Unselect
External BGP	20 Unselect 200 Unselect 110 Unselect 120 Unselect 90 Unselect

Question 20 of 40

21. By default, EIGRP calculates route metrics based on bandwidth and delay but it can also use other parameters in the calculation, including? (choose all which apply)

Load

Hop Count

Reliability

MTU

Question 21 of 40

22. Match the Email ports with the protocols.

POP3	25 Unselect 143 Unselect 110 Unselect
SMTP	25 Unselect 143 Unselect 110 Unselect
IMAP	25 Unselect 143 Unselect 110 Unselect

Question 22 of 40

23. Domain Name System (DNS) is a protocol that translates IP addresses into names.

True

False

Question 23 of 40

24. DNS functions over TCP, so if no response is received in a timely manner, another DNS query will be sent.

True

False

Question 24 of 40

25. _______ is a protocol used by network devices to synchronize time across the network infrastructure.

Device Time Protocol (DTP)

Universal Time Protocol (UTP)

Network Time Protocol (NTP)

Atomic Time Protocol (ATP)

Question 25 of 40

26. Your boss asks you to permit Remote Desktop Protocol (RDP) through the firewall. Which port do you allow?

TCP port 89

TCP port 3389

UDP port 39

TCP port 179

Question 26 of 40

27. A ___ is used by the SNMP agent to transmit unsolicited alarms to the Network Management Station (NMS) when certain conditions occur (e.g., device failure, state change, or parameter modifications).

Set

Alarm

Alert

Trap

Question 27 of 40

28. SNMPv3 provides which three security levels?

NoAuthNoPriv

No Priv

AuthNoPriv

AuthPriv

Question 28 of 40

29. Internet Control Message Protocol (ICMP) is a maintenance protocol that operates at Layer 2 and sends control messages over the network.

True

False

Question 29 of 40

30. Your office has only one routable IP address but has multiple hosts which need to get out to the internet. Which solution do you use?

Static NAT

NAT Pool

PAT (NAT Overload)

NAT-64

NAT-PT

Question 30 of 40

31. _______ is a technology that allows switches to pass electrical power along with data on Ethernet cables.

Dual use Ethernet (DuE)

Data over Ethernet (DoE)

Power over Ethernet (PoE)

Voltage over Ethernet (VoE)

Question 31 of 40

32. DHCP address allocation is a four-step process. What are the four steps?

DHCP Discover

DHCP Offer

DHCP Request

DHCP ACK

DHCP Terminate

DHCP RST

Question 32 of 40

33. In a crossover cable, which pin connections are swapped? (Choose all which apply)

1-3

4-7

2-6

8-5

Question 33 of 40

34. You need to issue a ping on a Windows PC. It must keep pinging the destination until you manually stop it. Which command do you issue?

ping -n

ping -t

ping -i

ping -f

Question 34 of 40

35. Match the correct traceroute command for the operating system.

Windows	tracert Unselect traceroute Unselect traceroute Unselect
Linux	tracert Unselect traceroute Unselect traceroute Unselect
Cisco IOS	tracert Unselect traceroute Unselect traceroute Unselect

Question 35 of 40

36. Out output below is from which Windows command?

arp -a

route print

ipconfig

ipconfig /all

Question 36 of 40

37. The _______ command is included in most modern operating systems and it shows the active connections on a machine.

netbios

ipconfig

netstat (network statistics)

arp -a

Question 37 of 40

38. IPSec helps protect the information that is transmitted through the VPN. VPNs with IPSec can be of which two main varieties? (Choose all which apply).

Site-to-site VPNs

Server to server VPNs (SSVPN)

Remote access VPNs (client-to-site)

Client only VPN

Question 38 of 40

39. Kerberos has which three main components?

KDC (Key Distribution Center)

Client Redirection Service

Authentication Service

Ticket Granting Service

Server Redirection Service

Question 39 of 40

40. RADIUS functions over UDP, while TACACS+ uses TCP.

True

False

Question 40 of 40

TCP/IP Quiz

ABOUT US

MOST POPULAR

Members

Newsletter

Secure Site