This course is packed with 45 mini-labs where you can follow along with your instructor and really understand the theory. Each chapter ends with several full labs where you configure complex technologies and test your configurations. Completly revised and updated for the brand new CCNA exams.
- 200-125 CCNA – Interconnecting Cisco Networking Devices: Accelerated (CCNAX)
- 100-105 ICND1 – Interconnecting Cisco Networking Devices: Part 1 (ICND1)
- 200-105 ICND2 – Interconnecting Cisco Networking Devices: Part 2 (ICND2)
We take you by the hand and guide you through the entire CCNA syllabus broken into ICND1 and then ICND2 so you can take the one or two exam route. There is more than $400 worth of practice exams included, advanced challenge labs, and bonus study videos included for you to enjoy for no extra charge and to guarantee your success come exam day.
Take this course if:
- You have been studying for your CCNA for a while now but don't feel ready
- Can't seem to nail subjects such as subnetting or Access Lists
- Can't find enough practise exams with solutions to prepare yourself
- Find just reading a study guide not sufficient to understand the material
- Want an easy-to-follow study program that will get you results
- Want free 24/7 access to live Cisco equipment to practise on
Your Instructor
Paul Browning
Is the author of Amazon best selling books Cisco CCNA Simplified and CCNA in 60 Days.He started teaching IT courses in 2002 after leaving Cisco systems and went on to create several successful online training companies and study guides.
Paul can explain difficult subjects in an easy-to-understand way which has made his classroom and online courses extremely popular. His easy subnetting method has been used by thousands of students from all over the world.
- Over 20 hours of video training
- Instructor guided labs
- End-of-module exams
- End-of-course certificate
- Access to members only forum
- Exam vendor – Pearson Vue
- Prerequisites – None
- Recommended – Network+ or CCNA Primer
| Module 1 | 1.0 Network Fundamentals - ICND1 |
| Unit 1 | Network Devices and Functions |
| Unit 2 | OSI and TCP Models |
| Unit 3 | TCP Protocols and Services |
| Unit 4 | Lab - Checking the ARP Cache |
| Unit 5 | Lab - ProxyARP |
| Unit 6 | Cabling the Network |
| Unit 7 | Ethernet Concepts |
| Unit 8 | Lab - Duplex and Speed Settings |
| Unit 9 | Wireless Networks and Firewalls |
| Unit 10 | IPv4 Addressing |
| Unit 11 | Subnetting |
| Unit 12 | Fast Subnetting |
| Unit 13 | Address Summarization and VLSM |
| Unit 14 | IPv6 Addressing |
| Unit 15 | Lab - Neighbor Discovery Protocol in Action |
| Unit 16 | Subnetting IPv6 |
| Unit 17 | Lab - Configuring IPv6 |
| Unit 18 | Troubleshoot Layer 1 |
| Unit 19 | Troubleshoot IP Addressing |
| Unit 20 | Lab - Troubleshooting IP Addressing |
| Unit 21 | Lab - Changing the Configuration Register |
| Unit 22 | Lab - Basic Router Modes and Commands |
| Unit 23 | Lab - ARP, CDP, PING and Telnet |
| Unit 24 | Lab - IP Addressing |
| Module 2 | 2.0 LAN Switching Fundamentals - ICND1 |
| Unit 1 | VLANs and Switching and DTP |
| Unit 2 | Lab - Configuring VLANs and Trunk Links |
| Unit 3 | Lab - Checking the MAC Address Table |
| Unit 4 | Lab - IP Default Gateway on a Switch |
| Unit 5 | Lab - Access Ports - Data and Voice |
| Unit 6 | VTP |
| Unit 7 | Lab - Configuring VTP |
| Unit 8 | CDP and NTP |
| Unit 9 | Lab - Checking CDP Neighbors |
| Unit 10 | Switch Port Security |
| Unit 11 | Lab - Switch Port Security |
| Unit 12 | Lab - Switch Security |
| Unit 13 | Troubleshoot VLANs |
| Unit 14 | Troubleshoot VTP and Trunking |
| Unit 15 | Lab - Troubleshooting VTP, VLANS, and Trunking |
| Unit 16 | Lab - VLANs on an IOS Switch |
| Unit 17 | Lab - Trunking Across IOS Switches |
| Module 3 | 3.0 Routing Fundamentals - ICND1 |
| Unit 1 | IP Routing |
| Unit 2 | Lab - Classful and Classless Routing Protocols |
| Unit 3 | Static Routing |
| Unit 4 | Lab - Configuring a Static Route |
| Unit 5 | Lab - Configuring an IPv6 Static Route |
| Unit 6 | CEF |
| Unit 7 | Lab - Configuring Cisco Express Forwarding |
| Unit 8 | InterVLAN Routing |
| Unit 9 | Troubleshooting InterVLAN Routing |
| Unit 10 | Lab - InterVLAN Routing Using Physical Router Interfaces |
| Unit 11 | Lab - InterVLAN Routing Using Subinterfaces |
| Unit 12 | Lab - InterVLAN Routing Using SVIs |
| Unit 13 | RIPv2 |
| Unit 14 | Lab - Configuring RIPv2 |
| Unit 15 | Troubleshooting Routing |
| Unit 16 | Lab - Simple IPv6 |
| Unit 17 | Lab - Static Routes |
| Unit 18 | Lab - InterVLAN Routing |
| Unit 19 | Lab - Configure and Troubleshoot RIPv2 |
| Module 4 | 4.0 Infrastructure Services - ICND1 |
| Unit 1 | DHCP and DNS |
| Unit 2 | Lab - DHCP Configuration on Cisco IOS Routers |
| Unit 3 | Lab - Troubleshooting DNS |
| Unit 4 | Lab - Ping Hostnames |
| Unit 5 | NAT |
| Unit 6 | Access Lists |
| Unit 7 | DNS in Detail |
| Unit 8 | Troubleshoot ACLs and NAT |
| Unit 9 | Lab - Configuring a Router as a DHCP Server |
| Unit 10 | Lab - Access Lists (Standard) |
| Unit 11 | Lab - Access Lists (Extended) |
| Unit 12 | Lab - Access Lists (Named) |
| Unit 13 | Lab - Static NAT |
| Unit 14 | Lab - NAT Pool |
| Unit 15 | Lab - NAT Overload |
| Module 5 | 5.0 Infrastructure Maintenance - ICND1 |
| Unit 1 | Network Device Security |
| Unit 2 | Lab - Adding a Telnet Password |
| Unit 3 | Lab - Enabling SSH Access |
| Unit 4 | Lab - Configuring LLDP |
| Unit 5 | Cisco IOS Licensing |
| Unit 6 | SNMP and Syslog |
| Unit 7 | Lab - Cisco IOS Syslog Configuration |
| Unit 8 | Router Architecture |
| Unit 9 | Lab - Basic Router Security |
| Unit 10 | Lab - Switch Security |
| Unit 11 | Lab - Copy Startup Config Using TFTP |
| Unit 12 | Lab - Syslog |
| Module 6 | 1.0 LAN Switching Technologies - ICND2 |
| Unit 1 | STP |
| Unit 2 | Lab - STP Operations |
| Unit 3 | Enhancements to STP and RSTP |
| Unit 4 | Lab - Configuring UplinkFast |
| Unit 5 | Lab - Configuring BPDU Guard |
| Unit 6 | Lab - Configuring PVRST |
| Unit 7 | Etherchannels |
| Unit 8 | Lab - PAgP Configuration |
| Unit 9 | Lab - LACP Configuration |
| Unit 10 | Switch Stacking and Chassis Aggregation |
| Unit 11 | L2 Mitigation Techniques |
| Unit 12 | Lab - STP |
| Unit 13 | Lab - LACP Etherchannels |
| Module 7 | 2.0 Routing Technologies - ICND2 |
| Unit 1 | OSPF |
| Unit 2 | Lab - Configuring Single-Area OSPF |
| Unit 3 | Lab - Configuring OSPF Interfaces |
| Unit 4 | Lab - OSPF Passive Interfaces |
| Unit 5 | Lab - Configuring Single-Area OSPFv3 |
| Unit 6 | Advanced OSPF |
| Unit 7 | Lab - Configuring Multi-area OSPF |
| Unit 8 | Lab - Configuring and Verifying OSPFv3 Multi-area in Cisco IOS Software |
| Unit 9 | EIGRP |
| Unit 10 | Lab - Configuring EIGRP |
| Unit 11 | Lab - EIGRP Passive Interfaces |
| Unit 12 | EIGRP for IPv6 |
| Unit 13 | Troubleshooting EIGRP |
| Unit 14 | Troubleshooting OSPF |
| Unit 15 | Lab - Troubleshooting OSPF |
| Unit 16 | Lab - Single Area OSPF |
| Unit 17 | Lab - Multi-area OSPF |
| Unit 18 | Lab - Multi-area OSPFv3 |
| Unit 19 | Lab - Configuring EIGRP |
| Unit 20 | Lab - Configuring EIGRP for IPv6 |
| Module 8 | 3.0 WAN Technologies - ICND2 |
| Unit 1 | WAN Services |
| Unit 2 | eBGP Part 1 |
| Unit 3 | eBGP Part 2 |
| Unit 4 | Lab - Simple BGP |
| Unit 5 | Introduction to PPP and MLPPP |
| Unit 6 | Configuring PPP and MLPPP |
| Unit 7 | Lab - Configuring PPP |
| Unit 8 | Lab - Configuring MLPPP |
| Unit 9 | PPPoE |
| Unit 10 | Lab - Configuring PPPoE |
| Unit 11 | Lab - Troubleshooting PPPoE |
| Unit 12 | GRE |
| Unit 13 | Lab - Configuring GRE |
| Unit 14 | Lab - Troubleshooting GRE |
| Module 9 | 4.0 Infrastructure Services - ICND2 |
| Unit 1 | HSRP |
| Unit 2 | Lab - HSRP Configuration |
| Unit 3 | Cloud Computing |
| Unit 4 | Introduction to QoS |
| Unit 5 | QoS Solutions |
| Unit 6 | Virtualization |
| Unit 7 | IPv6 ACLs |
| Unit 8 | Lab - IPv6 ACL |
| Unit 9 | Lab - Troubleshooting IPv6 ACLs |
| Unit 10 | Lab - APIC-EM |
| Unit 11 | Lab - HSRP Configuration |
| Module 10 | 5.0 Infrastructure Maintenance - ICND2 |
| Unit 1 | SNMP |
| Unit 2 | Cisco SNMP |
| Unit 3 | Lab - Configuring SNMP |
| Unit 4 | IP SLA |
| Unit 5 | Lab - Configure IP SLA |
| Unit 6 | SPAN |
| Unit 7 | Lab - Configure SPAN |
| Unit 8 | AAA |
| Unit 9 | Lab - Configure AAA |
| Unit 10 | Network Programmability |
| Module 11 | Bonus Labs |
| Unit 1 | Introduction |
| Unit 2 | IP Addressing |
| Unit 3 | LAN Switching |
| Unit 4 | IP Routing |
| Unit 5 | Infrastructure Services |
| Unit 6 | Infrastructure Maintenance |
| Unit 7 | WAN Topologies |
| Unit 8 | Final Verification |
| Module 12 | 1001 Cisco CCNA Exam Questions |
| Unit 1 | Exams Link |
