Video training course to prepare you for the CCNP ENCOR exam. Please take this course after or alongside the CCNP ENCOR primer course. It will lay a strong foundation for you. The CCNP exams are now approaching CCIE level so this will give you a head-start for your advanced studies.
- CCNP ENCOR 350-401
Your Instructor
Jay Ocampo
Jay is CCIE 59340, is a seasoned Solution Network Architect/Engineer with 15 years of total experience in IT service management, operations, system integration , network engineering and enterprise architecture. He obtained a Cisco CCIE Data Center certification and holds a Bachelor's degree in Electronics and Communications Engineering.
He currently lives in the Philippines.
- Over 13 hours of video training
- Instructor guided labs
- Access to members only forum
- Exam vendor – Pearson Vue
- Prerequesites – None
- Recommended – CCNA, CCNP ENCOR Primer
Module 1 | Architecture |
Unit 1 | Welcome to the Course |
Unit 2 | Enterprise Architecture |
Unit 3 | WLAN Deployment Design Principles |
Unit 4 | On-Premise vs Cloud Infrastructure Deployment |
Unit 5 | Cisco SD-WAN Principles and Solution Design |
Unit 6 | Cisco SD-Access Principles and Solution Design |
Unit 7 | QoS and its Components |
Unit 8 | Hardware Vs Software Switching Mechanisms |
Unit 9 | Exam |
Module 2 | Virtualization |
Unit 1 | Virtualization Technologies |
Unit 2 | Configuring and Verifying Data Path Virtualization Technologies |
Unit 3 | Network Virtualization Concepts |
Unit 4 | Exam |
Module 3 | Infrastructure |
Unit 1 | Configuration, Verification and Troubleshooting of Static and Dynamic 802.1Q Trunking Protocols and EtherChannels |
Unit 2 | Configure and verify common Spanning Tree Protocols (RSTP and MST) |
Unit 3 | Configure and Verify OSPF Environments (Part 1) |
Unit 4 | Configure and Verify OSPF Environments (Part 2) |
Unit 5 | Configure and Verify OSPF Environments (Part 3) |
Unit 6 | Configure and Verify BGP Environments (Part 1) |
Unit 7 | Configure and Verify BGP Environments (Part 2) |
Unit 8 | Wireless LAN (Part 1) |
Unit 9 | Wireless LAN (Part 2) |
Unit 10 | IP Services (Part 1) |
Unit 11 | IP Services (Part 2) |
Unit 12 | IP Services (Part 3) |
Unit 13 | Exam |
Module 4 | Network Assurance |
Unit 1 | Common Network Troubleshooting Tools |
Unit 2 | Netflow, SPAN, and IP SLA |
Unit 3 | Cisco DNA Center Automation and Assurance |
Unit 4 | NETCONF and RESTCONF |
Unit 5 | Exam |
Module 5 | Security |
Unit 1 | Device Access Control |
Unit 2 | Access-lists, COPP and Security REST API |
Unit 3 | WLAN Security Features |
Unit 4 | Lab - WLAN Security |
Unit 5 | Network Security Design (Part 1) |
Unit 6 | Network Security Design (Part 2) |
Unit 7 | Exam |
Module 6 | Automation |
Unit 1 | Interpret Basic Python Components and Scripts |
Unit 2 | Interpret Basic Python Components and Scripts Part 2 |
Unit 3 | JSON and YANG |
Unit 4 | Describe API for Cisco DNA Center |
Unit 5 | Describe API for Cisco vManage |
Unit 6 | Interpret REST API Response Codes and Results |
Unit 7 | Constructing an EEM Applet |
Unit 8 | Chef, Puppet, Ansible, and SaltStack |
Unit 9 | Exam |
Module 7 | Bonus Exams |
Unit 1 | Exam 1 |
Unit 2 | Exam 2 |