Video training course to prepare you for the Implementing Cisco Enterprise Advanced Routing and Services v1.0 (ENARSI 300-410) exam. Please take this course after you have taken the CCNP ENCOR if possible (unless you have already taken it elsewhere). This course will prepare you for the new CCNP exam which will help you pass the CCIE Enterprise Infrastructure Certification lab exam if that is your goal.
You should take our CCNP ENCOR Primer and CCNP ENCOR course before this one.
Your Instructor
David Voss
CCIE 11372, has been involved with networking since 1996. He has achieved CCNA, CCDA, CCNP, and CCDP certifications and in 2013 he celebrated his 10th anniversary as a CCIE. He currently works in network design, but has also worked in consulting, pre-sales, and engineering for large corporations and Cisco partners.
He currently lives in Virginia (USA) with his wife and three kids. David completed a Master of Science in IT Executive Management from Virginia Commonwealth University in the spring of 2014.
- Over 14 hours of video training
- Instructor guided labs
- Access to members only forum
- Exam vendor – N/A
- Prerequesites – N/A
- Recommended – CCNA, CCNP ENCOR, CCNP ENSARI
| Module 1 | Routing Fundamentals |
| Unit 1 | Routing Protocol Fundamentals |
| Unit 2 | Frame Relay Operations |
| Unit 3 | Policy Based Routing and IP SLA |
| Module 2 | Layer 3 Routing - EIGRP |
| Unit 1 | EIGRP Concepts |
| Unit 2 | EIGRP Activation and Neighborships |
| Unit 3 | EIGRP Topology Table |
| Unit 4 | EIGRP Customization and Authentication |
| Unit 5 | EIGRP Route Manipulation and Filtering |
| Module 3 | Layer 3 Routing - OSPF |
| Unit 1 | OSPF Concepts |
| Unit 2 | OSPF Activation and Neighbor Relationships |
| Unit 3 | OSPF Topology and Link State Advertisements |
| Unit 4 | OSPF Route Manipulation |
| Unit 5 | OSPF Virtual Links and Frame Relay Configuration |
| Module 4 | Layer 3 Routing - BGP |
| Unit 1 | BGP Concepts |
| Unit 2 | BGP Configuration |
| Unit 3 | BGP Verification |
| Unit 4 | BGP Path Control |
| Module 5 | Layer 3 - IPv6 Routing |
| Unit 1 | IPv6 Addressing and Migration |
| Unit 2 | IPv6 Routing Protocols Overview |
| Unit 3 | EIGRP (v6) Configuration and Verification |
| Unit 4 | OSPFv3 (v6) Configuration and Verification |
| Unit 5 | BGP (v6) Configuration and Verification |
| Module 6 | Troubleshoot IP Routing |
| Unit 1 | Troubleshoot IPv4 Addressing and Subnetting |
| Unit 2 | Troubleshoot EIGRP |
| Unit 3 | Troubleshoot EIGRP v6 |
| Unit 4 | Troubleshoot OSPF |
| Unit 5 | Troubleshoot OSPF v3 |
| Unit 6 | Troubleshoot BGP |
| Unit 7 | Troubleshoot Routing Redistribution |
| Module 7 | VPN Technologies |
| Unit 1 | Introduction to Virtual Private Networks (VPN) |
| Unit 2 | Virtual Private Network and IP Security for VPNs |
| Unit 3 | IPSec VPN (Part 1) |
| Unit 4 | IPSec VPN (Part 2) |
| Unit 5 | Configure and verify GRE |
| Unit 6 | DMVPN Part 1 - mGRE and NHRP |
| Unit 7 | DMVPN Part 2 - IPSec |
| Unit 8 | MPLS |
| Unit 9 | Multiprotocol Label Switching VPN Technology |
| Module 8 | Infrastructure Security |
| Unit 1 | Introduction to AAA |
| Unit 2 | Configuring AAA |
| Unit 3 | Configuring AAA (Part 2) |
| Unit 4 | RADIUS and TACACS+ |
| Unit 5 | Network Management Protocols (Part 1) |
| Unit 6 | Network Management Protocols (Part 2) |
| Unit 7 | Restricting VTY Access and SNMP Overview |
| Unit 8 | Logging, NTP and Cisco IOS Resilient Configuration |
| Module 9 | Network Troubleshooting |
| Unit 1 | Troubleshooting Methodologies |
| Unit 2 | Using Cisco Diagnostic Tools |
| Unit 3 | Troubleshoot Device Management (SNMP, Logging, SPAN, etc) |
| Unit 4 | Troubleshoot DHCP |
| Unit 5 | Troubleshoot SLA |
| Module 10 | Routing Troubleshooting Lab |
| Unit 1 | Routing Lab - EIGRP/OSPF/BGP/Redistribution |
| Module 11 | Exams |
| Unit 1 | Exam 1 |
| Unit 2 | Exam 2 |
