CBT IT Certification Training

Unlimited IT Certification Courses via Streaming Video

CCNA Simplified – Extra Bonus Exam

Back to main page.

1. Which of the following are the steps to configure a subinterface on a router for inter VLAN routing?

Question 1 of 47

2. Traffic destined to 192.168.43.21 reaches the router, and the router has the following subnets in the routing table: 192.168.43.0/24, 192.168.32.0/20, 192.168.43.0/25, and 192.168.43.0/28. Which route will be used to forward the traffic?

Question 2 of 47

3. How long does it take for a port to transition from Learning state to Forwarding state based on the below output?

 

spanning 

Question 3 of 47

4. What alternative IPv6 representations of 3FFF:1234:0000:0000:020C:0000:FEA7:F3A0 IPv6 address are valid?

Question 4 of 47

5. Which OSPF state is described by 'OSPF routers send LSR packets to request more recent instances of LSAs that have not been received during the Exchange state. The updates sent are placed in a link state retransmission link until acknowledgments are received. When OSPF routers receive LSRs, they respond with an LSU (link state update) containing the required information'?

Question 5 of 47

6. Which of the following are some of the most common NAT configuration errors?

Question 6 of 47

7. Which LSA type provides information about destinations outside the local area?

Question 7 of 47

8. What is the destination MAC address of an ARP Request packet?

Question 8 of 47

9. What is the correct configuration on the router for inter VLAN routing?

 

intervlan 

Question 9 of 47

10. What CDP debug command produces this output?

 

debug-cdp-packets 

Question 10 of 47

11. When connecting to a Cisco device over the console port, what is the 'bits per second' value that you need to set up in your terminal application?

Question 11 of 47

12. Which of the following statements about OSPF operation are true?

Question 12 of 47

13. What is the prefix assigned to the link-local IPv6 addresses?

Question 13 of 47

14. What is the size of the 802.1q tag?

Question 14 of 47

15. Which of the following is not a state through which a DHCP client goes during IP assignment?

Question 15 of 47

16. You are shown this output. How many usable VLANs are there?

 

vlans 

Question 16 of 47

17. When will a trunk not be formed?

Question 17 of 47

18. You have the below output for route in the EIGRP topology table. To what value should the variance be set so that both next-hops will appear in the main routing table?

 

eigrp 

Question 18 of 47

19. Which of the following are advanced security features that SNMPv3 provides but SNMPv2c or SNMPv1 does not?

Question 19 of 47

20. Which of the following are some advantages of VTP version 3 over VTP version 1 or version 2?

Question 20 of 47

21. What is the best summary route for the following routes: 172.16.30.0/24, 172.16.24.0/21, 172.16.27.0/22, 172.16.20.0/24?

Question 21 of 47

22. Which of the following statements are true about the presentation layer in the OSI model?

Question 22 of 47

23. What command shows a brief summary of all interfaces?

Question 23 of 47

24. Which of the following are some of the Neighbor Discovery Protocol features?

Question 24 of 47

25. Based on the below output, which statements are true?

 

spanning 

Question 25 of 47

26. What command needs to be applied under a router interface whose IP address should be assigned through DHCP?

Question 26 of 47

27. Considering the below output, what will be the SWITCH-2 priority after the command 'spanning-tree vlan 100 root primary' is configured on SWITCH-2?

 

spanning-tree 

Question 27 of 47

28. Which of the following are the main methods to create interVLAN routing?

Question 28 of 47

29. You see the below output. What is the type of NAT configured?

 

nat 

 

Question 29 of 47

30. What port role is defined by this phrase: 'This elected port forwards data in the active topology'?

Question 30 of 47

31. Which statements about access ports are true?

Question 31 of 47

32. What is the Administrative Distance of External EIGRP?

Question 32 of 47

33. Based on the below diagram, what port will be in blocking state?

 

election-stp 

Question 33 of 47

34. What command returns this output?

 

sdm 

Question 34 of 47

35. Based on the below diagram, which port will have the role of a root port?

 

election-stp 

Question 35 of 47

36. You see the below output. Which statements are true?

 

lacp 

Question 36 of 47

37. Which switch relays VTP messages in this diagram?

 

vtp 

Question 37 of 47

38. A PC has the following MAC address: 00.11.AA.BB.CC.DD. What is the EUI-64 address generated for this MAC?

Question 38 of 47

39. Which of the following are the components of PPP?

Question 39 of 47

40. What are the sublayers of the Data Link layer in the OSI model?

Question 40 of 47

41. You see this log on a switch. What command was issued on SWITCH-2?

 

*Mar 29 10:04:55.564: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on GigabitEthernet1/0/2 (1), with SWITCH-2 GigabitEthernet1/0/2 (100).

Question 41 of 47

42. Which of the following are some of the steps involved in configuring DHCP server functionality on Cisco IOS?

Question 42 of 47

43. Considering the diagram below, what needs to be configured and on which routers so that the client can be assigned an IP address through DHCP?

 

dhcp-relay-2 

Question 43 of 47

44. You execute the traceroute command and see the below output. How many hops away is the IP address to which the traceroute command was executed?

 

traceroute 

Question 44 of 47

45. Which of the following are OSPF router types?

Question 45 of 47

46. In which subnet is host 172.16.100.119/29?

Question 46 of 47

47. Which of the following ACL commands will allow EIGRP traffic?

Question 47 of 47


 

content-filler